Company

Photos

DownloadIn Download-KorbDie Datei wurde in den Download-Korb gelegt
Loading ...
09.03.2015 | Photo
Innovation Forum 2015
Audi Matrix OLED symbolizes the close interplay of design and technology at Audi.
AU150093 / JPG
09.03.2015 | Photo
Innovation Forum 2015
The motions of the red dots are based on the car's movements. When a right turn is made, they flow to the right; when the car is braked they flow more dynamically and diffusely. The faster the car
AU150094 / JPG
09.03.2015 | Photo
Innovation Forum 2015
The new Audi Q7 offers groundbreaking control and display systems, and it prepares the way to the piloted driving with its wide range of driver assistance systems.


CES150093 / JPG
09.03.2015 | Photo
Innovation Forum 2015
At the Audi plant in Ingolstadt, the future has arrived: Since January 2015, a robot – known in the plant as “PART4you” – has been helping out at the assembly line. Its assignment: To use a camera
AU150122 / JPG
09.03.2015 | Photo
Innovation Forum 2015
The Audi R8 LMS is designed for the worldwide Customer Sport racing program. It uses a V10 engine with 5.2 liters of displacement, which produces up to 430 kW (585 hp). The car will make its first
AU150118 / JPG
09.03.2015 | Photo
Innovation Forum 2015
Vorsprung durch Technik is the hallmark that defines Audi in all areas of automobile development and production. In Audi’s new Lighting Assistance Center in Ingolstadt, engineers are developing
AU150137 / JPG
09.03.2015 | Photo
Innovation Forum 2015
The aerodynamic and aeroacoustic wind tunnel (AAWK) is able to generate wind speeds of up to 300 km/h. The air drag and aeroacoustics of automobiles are the primary focus here.
AU150115 / JPG
09.03.2015 | Photo
Innovation Forum 2015
The aerodynamic and aeroacoustic wind tunnel (AAWK) is able to generate wind speeds of up to 300 km/h. The air drag and aeroacoustics of automobiles are the primary focus here.
AU150116 / JPG
09.03.2015 | Photo
Innovation Forum 2015
The Audi R8 LMS is designed for the worldwide Customer Sport racing program. It uses a V10 engine with 5.2 liters of displacement, which produces up to 430 kW (585 hp). The car will make its first
AU150117 / JPG
09.03.2015 | Photo
Innovation Forum 2015
The "electronic car data sheet" (eWBK ) shows, on monitors, precisely which parts a worker needs for the specific car. Images and colors provide quick and clear orientation. The new technology makes
AU150120 / JPG
09.03.2015 | Photo
Innovation Forum 2015
Paper car data sheets were the standard practice in production for around 30 years. All model versions and trim levels were depicted in code on the sheets, and they served as work instructions for
AU150121 / JPG
09.03.2015 | Photo
Innovation Forum 2015
Four lasers are installed in the intelligent tool. When they detect deviations from the target value, four pulling tools are controlled to adjust clamping forces and guarantee the stability of the
AU150126 / JPG
09.03.2015 | Photo
Innovation Forum 2015
The 3D printer uses laser melting processes to produce metal parts, which – because of their complex geometries – would hardly be producible, or not producible at all. Here: internal door parts of the
AU150129 / JPG
09.03.2015 | Photo
Innovation Forum 2015
The 3D printer uses laser melting processes to produce metal parts, which – because of their complex geometries – would hardly be producible, or not producible at all. Here: A model of a planetary
AU150130 / JPG
09.03.2015 | Photo
Innovation Forum 2015
Joachim Eipl-Prestel, Head of Machine Technology Ingolstadt.
AU150133 / JPG
09.03.2015 | Photo
Innovation Forum 2015
Vehicles can be driven into this underground light tunnel, which is 120 meters long and offers new possibilities, especially for the development of innovative lighting solutions and camera-based
AU150135 / JPG