Production

All Documents

DownloadIn Download-KorbDie Datei wurde in den Download-Korb gelegt
Loading ...
14.10.2014 | Photo
Jubilee in Brussels: 500,000th Audi A1
Jubilee at Audi Brussels: 500.000 Audi A1 have driven off the assembly line so far. Here are a few facts.

AU140716 / JPG
14.10.2014 | Photo
Jubilee in Brussels: 500,000th Audi A1
Jubilee at Audi Brussels: 500,000 Audi A1 cars produced at the plant. The jubilee model, a Misano red Audi A1 S line*, drove off the assembly line today. His Majesty King Philippe of Belgium visited t
AU140717 / JPG
08.10.2014 | Press Release
Audi Logistics: 30 years of the car loading platform
Jubilee at the Four Rings: 30 years ago today, Audi put a new loading station into operation at its site in Ingolstadt...
PDF
08.10.2014 | Photo
Audi Logistics: 30 years of the car loading platform
Jubilee: Audi Logistics celebrates 30 years of its car loading platform. Platform driver Herbert Zehnder experienced the introduction of the moving platform.
AU140701 / JPG
08.10.2014 | Photo
Audi Logistics: 30 years of the car loading platform
Jubilee: Audi Logistics celebrates 30 years of its car loading platform. Since the first use of the moving platform in October 1984, approximately eight million automobiles have left the Audi plant in
AU140702 / JPG
24.07.2014 | Press Release
Audi Hungaria: Start of production of the new Audi TT Coupe
The third generation of the Audi TT* and the TTS Coupe is now going into series production at AUDI HUNGARIA MOTOR Kft. Following last year’s start of production of the Audi A3 Sedan, the S3 Sedan...
PDF
24.07.2014 | Photo
Audi Hungaria: Start of production of the new Audi TT Coupe
AUDI HUNGARIA MOTOR Kft., Győr (Hungary)
Production Audi TT Coupe: paint shop

AU140552 / JPG
24.07.2014 | Photo
Audi Hungaria: Start of production of the new Audi TT Coupe
AUDI HUNGARIA MOTOR Kft., Győr (Hungary)
Production Audi TT Coupe: paint shop

AU140553 / JPG
24.07.2014 | Photo
Audi Hungaria: Start of production of the new Audi TT Coupe
AUDI HUNGARIA MOTOR Kft., Győr (Hungary)
Production Audi TT Coupe: Internal test track

AU140557 / JPG
24.07.2014 | Photo
Audi Hungaria: Start of production of the new Audi TT Coupe
AUDI HUNGARIA MOTOR Kft., Győr (Hungary)
Start of Production Audi TT Coupe: (left from TT, from outside inwards) Gerd Walker, Managing Director for Vehicle Production at Audi Hungaria and Dr. Bernd Martens, Member of the Board of Management

AU140558 / JPG
28.04.2014 | Press Release
FutureCityFactory: mastering urban challenges together
By the year 2050, more than 70 percent of the world’s population will live in cities. Which challenges will this bring for industrial production, distribution and services?...
PDF
28.04.2014 | Photo
FutureCityFactory: mastering urban challenges together
With the initiative FutureCityFactory, Audi’s Production division and the Network of Automotive Excellence have brought cities, scientists and business people around one table for the first time, to d
AL140005 / JPG
20.02.2014 | Press Release
Dr. Hubert Waltl to be new Board of Management Member for Production at AUDI AG
At his own request, Dr. Frank Dreves (61) is to step down from the Board of Management of AUDI AG and will retire as of March 31...
PDF
20.02.2014 | Photo
Dr. Hubert Waltl to be new Board of Management Member for Production at AUDI AG
In the picture: Dr. Frank Dreves. At his own request, Dr. Frank Dreves stepped down from the Board of Management of AUDI AG and retired as of March 31, 2014.
VOR120019 / JPG
10.02.2014 | Press Release
Audi arranges special shifts
AUDI AG has made a dynamic start to the new year: Strong demand for example for the Audi models A3, Q5 and A6, A7 and R8 has resulted in high levels of capacity utilization at the plants in...
PDF
10.02.2014 | Photo
Special shifts at Audi
Due to strong demand for the model series produced in Ingolstadt and Neckarsulm, Audi arranged for special shifts to be worked right at the beginning of the year. That makes a total of 33 additional s
AU130199 / JPG
05.02.2014 | Press Release
New machinery for Audi’s Toolmaking
Even more dynamic and exact, even stronger and more efficient – since yesterday, seven new and efficient high-precision machines have been officially in operation in Audi’s Toolmaking department...
PDF
05.02.2014 | Photo
New machinery for Audi’s Toolmaking:
The milling machine reaches speeds of up to 24,000 revolutions per minute. It can process components with a maximum size of 5.5 square meters.


AU140073 / JPG
05.02.2014 | Photo
New machinery for Audi’s Toolmaking:
The milling machine can process components with a maximum size of 5.5 square meters. The milling head can be swiveled around five axes and allows extremely precise processing of the individual compone
AU140074 / JPG
05.02.2014 | Photo
New machinery for Audi’s Toolmaking:
The hydraulic press (right) and the servo-mechanical press (left) ensure more precision when new tools are tested. Particularly impressive: The closing force of the servo-mechanical testing press of 2
AU140075 / JPG
05.02.2014 | Photo
New machinery for Audi’s Toolmaking:
The milling machine reaches speeds of up to 24,000 revolutions per minute. It processes the tools extremely dynamically and precisely.


AU140076 / JPG